Rust remover, alkaline, immersion, will remove oil, grease and some paints.
moreless
Primarily intended for the removal of rust from iron and steel, it is also capable of removing oil, grease and some air-dried paints. The material is supplied as water-soluble powder giving a strongly alkaline solution containing sequestrants. Application by immersion.
Paint remover, environmentally advantaged, 2 liquid concentrates, immersion or spray, will also remove carbon.
moreless
Removal of a wide range of paint schemes including stoved acrylics, epoxies, polyurethanes and phenolics. It will also remove carbon or carbonaceous deposits, polymerised gum and lacquer deposits.The material is a di-phase aqueous blend of solvent, activators and corrosion inhibitors. Immersion or spray.
Paint remover, heavy duty, methylene chloride, phenol, ready to use, application.
moreless
Removal of the more resistant types of polyurethane and epoxy surface coatings. Contains phenol and methylene chloride. A lower viscosity version, Ardrox® 2526 SV, which is more easily spray applied, is available.
For cleaning and degreasing of aircraft structures and components, where an old corrosion inhibiting compound film, and / or grease needs to be removed safely and effectively, e.g. internal structures, wheel-wells, as well as removal of contamination from the exterior surfaces, such as accidental over-spray and material penetrating to the outside through loose fasteners.
Gardostrip 5628A is a paint stripping system to remove polyester powder paint from aluminium, zinc and steel surfaces. It is free from chlorinated hydrocarbons, phenols and cresols. Gardostrip 5628A may also remove other paints, but is specifically designed for polyester. The action of Gardostrip 5628A on polyester is to pletely dissolve the resin, releasing the pigments into the solution for removal. Other paints will be lifted from the surface but not dissolved.
Kleenstrip System is a two part system made up of Kleenstrip A, a blended alkaline powder and Kleenstrip B, a solvent component. It is formulated to remove organic soils, and paint from either ferrous or non ferrous metals. This Kleenstrip system is designed for use in agitated immersion cleaning units. Kleenstrip can be a drop-in replacement for methylene chloride strippers in some applications, only requiring the addition of heating and agitation. Simple air agitation is often adequate.